There were times when we would not mind sitting idly while surfing randomly through the myriad of channels to dig in for some desirable content that is worth our time and can provide us the perfect dose of entertainment. But not anymore! Nowadays every minute counts and we are struggling to take some time out of our busy schedules to relax our minds by watching our favorite kind of entertainment.

Whether you have subscribed to one of the Mediacom TV packages, or a suitable Mediacom bundle offer, it allows you to save good bucks and enjoy high-quality services. The good news is, you can save further money by avoiding any technical support. Hooking up a Mediacom Cable Box with your TV is as easy as cake. All you need to do is follow some basic steps and you will be done with the installation of your Mediacom Cable Box in no time. Here we go!

Installation of your Mediacom Cable Box

Setting up a Mediacom cable box is very simple, thus, requires very little effort. So before jumping to the steps, here is a quick look at the items you will require for self-installation.

Setting up a Mediacom cable box is very simple, thus, requires very little effort. So before jumping to the steps, here is a quick look at the items you will require for self-installation.

Prerequisites on How to Set Up Mediacom Cable Box

Before you start with the self-installation, here is a look at the must-have items that you need to check. You will need an HD Cable Box, HDMI Cable, Universal Remote Control, Coaxial Cables, and of course, a Power Cord.

Call 1-855-386-4094 Now to Subscribe to Mediacom Internet

How to Connect Mediacom Cable Box Easily?

  • Look out for a Cable IN port that will be present on the backside of your HD Cable Box.
  • Insert the coaxial cable into this port while the other end is connected to the nearest cable jack in the wall.
  • Look out for the HDMI port located at the backside of your Mediacom cable box and attach one end of the HDMI cable to it.
  • Now, check for the HDMI input on the HDTV and attach it to the other side of the same cable.
  • Attach the power cord to the backside of your Mediacom cable box and then connect it to a power socket.
  • Voila! You are all ready to make it work now. Grab your remote, switch your TV on with the HD cable box attached. Tune your TV set to a suitable HDMI input and have fun.
  • Lastly, it is now time to contact Mediacom and activate your Mediacom HD box. Once it is activated it will turn off by itself. Give it five minutes and then switch it on again.
  • You can now watch TV easily. As soon as you are done with this process, you will see a message on the screen that will say “To Be Announced”. This will show until the guide is fully downloaded.
  • To replace the old cable box, turn off the TV as well as the cable box. Detach the power cord, HDMI cable, and coaxial cable.
  • Remember to ship the previous equipment to Mediacom so that the unreturned equipment charge is waived off from your account.

In case you need any further information regarding the equipment return process, you can contact Mediacom customer support. You will also receive instructions along with the installation kit that will further guide you with the mailing steps.

Mediacom Cable Troubleshooting

If you are still facing trouble with your Mediacom HD cable box that does not seem to be working properly, you can call Mediacom Customer Support anytime for further assistance.

However, here are some quick tips to avoid any technical issue or error:

  • Make sure that your cable box is attached properly to the power cord.
  • Check if the cable box is properly attached to the cable outlet.
  • Check if all the HDMI cable is fixed properly with the cable box.
  • Your TV should be adjusted to the correct input.
  • The power cord should be fixed properly into the power outlet.

Wrapping Up,

You can self-install the Mediacom HD cable box conveniently by following the aforementioned guide. Simply follow the steps and save money by avoiding any technical support.

Frequently Asked Questions

What are the items you might need for the self-installation of the Mediacom HD cable box?

You will require an HD Cable Box, HDMI Cable, a Power Cord, Universal Remote, and Coaxial Cables to carry out the self-installation process to set up your Mediacom HD cable box.

What to do if the remote control does not seem to work?

If your remote is not working, you should press the CABLE option present on the remote control to be sure that it is in the right mode. There should be no obstacle causing hindrance in the line of sight between the digital cable box and the remote. Also, the batteries should be new and placed accurately